Operation Manual / TPR56-F + TPR61-F
4 Operation / 4.5 Stopping the engine
© Copyright 2018 . All rights reserved. HZTL2490_EN Revision D May 2018
4.4.4 Failure of speed measuring system
Possible reasons for failure of the speed measuring system are de-
scribed in the chapter Troubleshooting.
4.5 Stopping the engine
CAUTION
Stopping the engine
Heat in the turbocharger must be dissipated by the further circulating
lubricating oil.
u Allow the engine to continue running at idling speed for a further 10
minutes before stopping.
Page 42 / 79
To Next Page
Loading...