The operator panel
The operator panel is used to switch between Manual mode and Automatic mode.
The operator panel is located under the Quickset menu, see The Quickset menu
on page 32.
xx1500000005
Note
It is also possible to use the predefined I/O-signals to change and confirm the
operating mode, see I/O signals on page 45.
38 Operating manual - IRB 14000
3HAC052986-001 Revision: E
© Copyright 2015-2018 ABB. All rights reserved.
3 Using the IRB 14000
3.4 Operating modes
Continued
To Next Page
Loading...
