3 Maintenance
3.4.3. Oil change, gearbox axis 2
1593HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
2.
WARNING!
Handling gearbox oil involves several safety risks.
Before proceeding, please observe the safety
information in section WARNING - Safety risks
during work with gearbox oil on page 36.
3. Remove the oil plug, filling and the oil plug,
inspection.
Shown in the figure Location of oil
plugs on page 157.
4. Refill the gearbox with lubricating oil.
The amount of oil to be refilled depends on the
amount previously being drained. The correct oil
level is detailed in section Inspection, oil level
gearbox axis 2 on page 117.
Art. no. and total amount are
specified in Required equipment on
page 157.
5.
NOTE!
Don´t mix Kyodo Yushi TMO 150 with other oil
types!
Detailed in section Oil in
gearboxes.
6. Refit the oil plug. Tightening torque: 24 Nm.
Action Note
Continued
To Next Page
Loading...
