3 Maintenance
3.4.5. Oil change, gearbox, axis 4
1653HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
3. Refill the gearbox with lubricating oil through the oil
plug, filling.
The amount of oil to be refilled depends on the
amount previously being drained. The correct oil
level is detailed in section Inspection, oil level
gearbox axis 4 on page 121.
Shown in the figure Location of
gearbox on page 163.
Art. no. and total amount are
specified in Required equipment
on page 163.
4. Refit the oil plug, filling. Tightening torque: 24 Nm.
Action Note
Continued
To Next Page
Loading...
