4 Repair
4.3.3. Replacement of cable harness, Cleanroom
2113HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
12. Disconnect connectors:
• R2.SMB, R1.SMB1-3, R1.SMB4-4 to the
SMB unit
• X8, X9, X10 to the brake release unit
xx0700000104
13. Remove the cable gland by removing its attachment
screws from inside the SMB recess.
xx0700000109
Parts:
• A: Cable gland
• B: Attachment screws,
(inside SMB recess), 4
pcs
Action Note
Continued
Continues on next page
To Next Page
Loading...
