4 Repair
4.4.4. Replacement of upper arm
3HAC026876-001 Revision: C266
© Copyright 2006-2008 ABB. All rights reserved.
21. Recalibrate the robot. Calibration is detailed in a separate
calibration manual, enclosed with the
calibration tools.
General calibration information is
included in section Calibration informa-
tion.
22.
DANGER!
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in section DANGER - First test
run may cause injury or damage! on page 33.
Action Note
Continued
To Next Page
Loading...
