4 Repair
4.5.4. Replacement of balancing device (old and new)
2933HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
3. Apply Mercasol 3106 on the following
machined surfaces on the balancing
device:
• holes in the lower arm ear
• holes in the rod bracket
•shaft.
xx0700000454
• A: Machined surfaces in lower arm ear
• B: Machined surfaces in rod bracket
• C: Machined surfaces on shaft
4.
DANGER!
Make sure all safety requirements are
met when performing the first test run.
These are further detailed in section
DANGER - First test run may cause
injury or damage! on page 33.
Action Note
Continued
To Next Page
Loading...
