4 Repair
4.6.3. Replacement of motor, axis 3
3193HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
4.
NOTE!
Keep the old top cover with the air nipple
mounted.
5. Continue removal of the motor unit, according to
step 6 and forwards in section Removal, motor on
page 314.
6. Fill the four screw recesses on the new motor with
Sikaflex. (After hardening, Sikaflex can be formed
with a knife)
xx0600002875
•A: Motor unit
• B: Sikaflex in screw
recesses
7. Continue to refitt the new motor according to
section, Refitting, motor on page 316.
8. Perform a leak test according to Inspection of air
hoses (Foundry Prime) on page 138.
Action Note
Continued
To Next Page
Loading...
