7 Installation of controller software
7.0.5 Update the Robot Controller image
150 A 3HAC 16245-1
7.0.5 Update the Robot Controller image
Actions
Step Action Illustration/Info
1. To update an existing controller
system, press Update , see the
figure below.
xx0100000189
2. Select a system in the system
list and press OK , see the figure
above. Please note that a pop up
menu can be shown by clicking
right mouse button. With this
menu Copy, Rename or Delete
can be selected for the marked
system.
xx0100000190
3. The window displaying the cur-
rent configuration of the system
will be shown. Follow the
instructions in sections "Add or
remove external options", "Add
or remove additional system
parameters" or "Change options
or system pack revision" to mod-
ify the system.
To Next Page
Loading...
