ABB IRC5 Startup Guide

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 8 - Getting Robot Files from Forge/OS | 16
6. Insert a UOB flash drive into the IPC as instructed on the screen. Use an empty flash drive with at least 2GB of
storage.
Tip:
Do not connect the UOB flash drive to the READYpendant.
7. Tap Start Transfer and wait for it to finish.
8. Remove the UOB flash drive when prompted.

ABB IRC5 Specifications

General

Type	Industrial Robot Controller
Model	IRC5
Protection Class	IP54
Power Supply	200-600 VAC, 50/60 Hz
Communication Protocols	PROFIBUS, PROFINET, DeviceNet
Programming Language	RAPID
Number of axes	Up to 36
Storage Temperature	-25°C to +55°C
Relative Humidity	95% (non-condensing)