Physical connection 19
E1 / E2: Ethernet port configuration
The rotary switches are situated on the front panel of the MotiFlex e180. The rotary
switches are read once at startup. They select the mode of operation for the Ethernet
fieldbus connectors E1 and E2 on the top panel of the drive.
Set both front panel rotary HI / LO switches to 0 to select EtherCAT slave mode.
See MotiFlex e180 indicators on page 35 for a description of the fieldbus status
indicators.
Value Mode
00 EtherCAT slave mode
01-EF Ethernet POWERLINK CN mode: selected value is node ID
F0 Reserved
F1 Reserved
F2-FF Reserved
HI
LO
To Next Page
Loading...
