Section 2 Interface specications
Agency Approvals and Standards Compliance
Notice: FCC Part 15.105
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
3BSE080639 25
ABB Article
Number
Denomination Type Approval / Compliance
3BSE080211R1 NE840 EMC EN 61000-6-1, Electromagnetic
compatibility – Immunity for residential
environments
EN 61000-6-2, Electromagnetic
compatibility – Immunity for industrial
environments
EN 61000-6-4, Electromagnetic
compatibility – Emission for industrial
environments
EN 50121-4, Railway applications –
Electromagnetic compatibility – Emission
and immunity of the signalling and
telecommunications apparatus
IEC 62236-4, Railway signalling and
telecommunications apparatus
Safety UL/IEC/EN 60950-1, IT equipment
Marine DNV GL rules for classication – Ships and
offshore units