ABB NE840 - Section 1 Industrial Routing Switch; Housing

Section 1 Industrial Routing Switch
Section 1 Industrial Routing Switch
NE840 is a high performance layer 2 industrial Ethernet switch designed for high
network trafc applications. Various port congurations are available that can be
further customized with SFP transceivers. NE804 is powered by the ABB Network
Operating System (ABB NEOS).
NE840 is designed for 19” cabinet according to ETSI standard making it suitable for
use in control room networks as well as for cabinets installed along railway track side
or maritime installations. NE840 is designed to run efciently from an AC power
supply, the unit is also equipped with congurable I/O fault contact that make it ideal
for easy installation and monitoring in industrial applications.
NE840 Model
Housing
NE840 is designed for installation in 19” rack solutions according to ETSI
standard with a shallow depth of 240 mm as shown in Figure 1. NE840 can also be
wall mounted as an installation option.
3BSE080639 9
ABB Article
Number
Denomination Description
3BSE080211R1
NE840
8 x 10/100 Mbit/s, Ethernet TX, RJ-45
7 x 10/100/1000 Mbit/s, Gigabit Ethernet TX, RJ-45
4 x 100/1000 Mbit/s, pluggable connections
transceivers supported, Ethernet FX or TX SFP
AC power supply