EasyManua.ls Logo

ABB NE870 - Configuration

ABB NE870
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3BSE083159 27
Section 3 Interface Modules
For advanced network settings and more diagnostic information, please use the
CLI.
Detailed documentation is available in the chapter The Command Line
Management Tool in the NEOS User Manual.
Factory default:
– IP address: 172.16.5.245
– Netmask: 255.255.252.0
– Gateway: Disabled
Consult your network administrator to know more on subnet.
Conguration
Congure the unit via web browser. The unit can easily be congured through
a web browser. Open the link http://172.16.5.245 in your web browser, and you
will be prompted with a login screen, where the default settings for username and
password are:
– Username: admin
– Password: CS4dmin
Once you have logged in, you can use the extensive integrated help function
describing all conguration options. Two common task when conguring a new
switch is to assign appropriate IP settings, and to change the password of the admin
account.
The password can be up to 64 characters long, and should consist of printable
ASCII characters (ASCII 33-126); Space is not a valid password character.
For additional conguration information, refer to System 800xA Network
Conguration (3BSE034463) manual.

Related product manuals