3BSE08315928
Section 3 Interface Modules
Agency Approvals and Standards Compliance
Notice: FCC Part 15.105
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
ABB Article
Number
Denomination Type Approval / Compliance
3BSE080208R1 NE870 EMC EN 61000-6-1, Electromagnetic
compatibility – Immunity for residential
environments
EN 61000-6-2, Electromagnetic
compatibility – Immunity for industrial
environments
EN 61000-6-3, Electromagnetic
compatibiliy – Emission standards for
residential, commercial and light-industrial
environments
EN 61000-6-4, Electromagnetic
compatibility – Emission for industrial
environments
EN 50121-4, Railway applications –
Electromagnetic compatibility – Emission
and immunity of the signalling and
telecommunications apparatus
Safety UL/IEC/EN 60950-1, IT equipment
Marine
DNV GL rules for classication – Ships and
offshore units
To Next Page
Loading...
