16 CI/EDP300-EN Rev. C | PositionMaster EDP300
6.3.3 Mounting on control valves
Fig. 13: Integral mounting to control valves
1 Washers 2 Screws 3 O-ring 4 Lever
Fig. 14: Integral mounting on control valves using adapter plate
1 O-Ring 2 Adapter plate 3 Adapter
6.3.4 Mounting on part-turn actuators
For mounting on part-turn actuators in accordance with
VDI / VDE 3845, the following attachment kit is available:
Fig. 15: Components of attachment kit
— Adapter 1 with spring 5
— Four screws M6 4, four spring washers 3, and four
washers
2 for attaching the mounting bracket 6 to the
positioner
— Four screws M5
7, four spring washers 8, and four
washers 9 for attaching the mounting bracket to the
actuator
Required tools:
— Wrench, size 8 / 10
— Allen key, size 3
M10130-01
1
2
3
4
5
6
7
8
9
To Next Page
Loading...
