5.2.3 Wavemon Shutdown and management software
is an external monitoring and shutdown software which was designed to operate
with all UPS products, both with the DRY PORT (Relays) on Terminal block X2 …X4 and RS232 port
JD11 on the communication card
The software packet consists of a CD ROM for most diffused operating systems (Windows, Unix, OS/2,
DEC VMS, Novell, Apple), a standard connection and a user manual.
The dry port X2…X4 with voltage-free contacts may also be used for automatic shutdown in connection
with
. It is necessary to provide a cable of 0.5 mm2 to connect Terminals X2..X4
of the UPS and the serial port of the server.
Figure 18: Monitoring image
The main characteristics of
are:
• Automatic unattended master/slave shutdown in heterogeneous networks
• On-screen autonomy time / battery time countdown
• On-screen server log off and shutdown procedure
• Extensive logging of all UPS activity and power quality data, with timestamp
• Scheduled UPS economy mode, service mode, other systems status
• Graphical user interface for Windows compatible platforms
• Automatic unattended local shutdown
• Special software modules to close and save open MS-Office documents.
• Compatible for all optional modules like UPSDIALER, SNMP adapters, Temperature sensors,
etc.
The UPS-Management Software is a client-/server-application for networks and local workstations.
Basically
consists of two parts: the server-module of the UPS-Management
Software is
, which communicates via RS-232 cable with the UPS. Working as a background
process the UPSServ collects messages, received from the UPS. The UPSServ interprets received
messages and makes them available to the client-module
and to any SNMP-based
management station.
To Next Page
Loading...
