ABB PowerWave 33 Series 3 - Revision History

Modifications reserved
Page 2/15
Document information
File name
: TDS_ABB_PW33_S3_60-120kW_EN_REV-A.docx
UPS model
:
PowerWave 33 Series 3
Date of issue
: 02.02.2016
Article number
: N/A
Document number
: 4NWD003258
Revision
: A
Revision history
Revision number
Chapter
Description
Date
140714 9.1 Cable entry: bottom bottom, bottom rear
Parallel capability: up to 10 frames up to 6
frames
14.07.2014
9.2 Corrected “Current (r.m.s), maximum (with
charging batt. and input 400/230V)”
102 135 168 202
101 134 167 201
9.8 Added fuse type on the description of the
Fuse E in tables 13 and 14.
Type: gR or CB
140730 9.1 Added “Acoustic noise (acc. to IEC 62040-3)”
figures
30.07.2014
9.2 Added “rated short-time withstand current
(I
CW
)” figure
9.3 Added “Eco-mode efficiency, linear load”
figure
9.3 Added “AC / AC efficiency in normal mode,
linear load” figures for each model.
9.7 Added “head dissipation without load” figures
9.8 Corrected the recommended wiring for
batteries (Cable E) tables 13 and 14 like in
section 4.4
150206 N/A New release for some user manual corrections 06.02.2016
REV-A N/A Updated the entire layout of the document 04.02.2016
7 Updated the entire “Installation planning”
chapter
9 Corrected the IA3 and IA4 references on the
block diagram picture.