ABB PSE18 - Product Overview and Installation; PSE Softstarter Features and Specifications; Control Options and Initial Checks

- 5 -
15. Mount the cables on the sub-board
according to the fig. below. It is very
important that each cable is correctly mounted
to the correct terminal.
PSE18…105
Fan
Temp. sensor
CT L1
Bypass L1
Bypass L3
CT L3
PSE142…170
From thyristor L1
From thyristor L3
Temp. sensor
Fan CT L1
Bypass
CT L3
PSE210…370
From thyristor L1
From thyristor L3
From Mainboard
To bypass contactor
CT L1
Temp. sensor
Fan CT L3