- 6 -
16. Connect the ribbon cable on the sub-board.
17. Connect the gate cables on the main-
board.
18. For PSE210…370 connect the cable between
the main board and the sub board.
19. Mount the HMI module.
20. For PSE18…105 mount the connection
unit.
21. Connect the cables to 1L1, 3L2, 5L3 (main
voltage) and 2T1, 4T2, 6T3 (motor
connection).
22. Connect all the cables to the terminals 1
through 14, external keypad and the fieldbus
plug accessory.
.
To Next Page
Loading...
Need help?
General
