ABB PST210 - Page 58

7:2.5 Presentation Settings
The Presentation setting menu consists of parameters for the LCD set-up. The presenta-
tion language can be chosen among 12 different languages. The real-time clock for the
softstarter can be set in this menu.
Enter the Presentation settings
Enter the menu by selecting
Presentation Set.
Presentation language
To set the desired presentation language on the LCD, press
Change and Store the
selected language. Country codes are based on ISO 3166.
Available languages are:
Language Abbreviation in LCD Language Abbreviation in LCD
English US/UK Italian IT
Chinese CN Dutch NL
German DE Portuguese PT
Spanish ES Swedish SE
French FR Finnish FI
Russian RU Turkish TR
Information!
In case the wrong language is selected, follow the “emergency instructions” below to
reach this parameter. (Start from the top level.)
Press left selection key twice.
Press lower navgation key three times.
Press left selection key twice.
Use the navigation keys to nd the required language abbeviation.
Press left selection key to save the parameter.
LCD Auto Off
The LCD will be switched off automatically by a pre-set time between 1 - 255 minutes. If
the display has switched off, touch any of the keys to turn it on again.
Date Type
The date can be presented in three different ways. Depending on the selected type, the
following will be displayed at the top level:
Date type Display on the LCD
ISO Year - Month - Day
US Month - Day - Year
CE Day - Month - Year
Date Year
To set the year in the real time clock, press Change to enter the setting level. Press Store
to save the set value.
Date Month
To set the month in the real time clock, press Change to enter the setting level. Press
Store to save the set value.
Date Day
To set the day in the real time clock, press Change to enter the setting level. Press Store
to save the set value.
Time Hour
To set the hours in the real time clock, press Change to enter the setting level. Press
Store to save the set value.
Time Min
To set the minutes in the real time clock, press
Change to enter the setting level. Press
Store to save the set value.
The conguration of the presentation setting menu is now completed. It is possible to
return to the top level by pressing Back 3 times.
Figure 32: Presentation Settings menu
Top level
Settings
Application setting
Basic settings
Functional settings
Presentation settings
Service settings
All settings
Changed settings
Reset all settings
Operation mode
Chapter 7
Settings and conguration
7.20 Low Voltage Products & Systems
1SXU 132 021 M0201 ABB Inc. • 888-385-1221 • www.abb-control.com
7