4 PSTX ENCLOSED SOFT STARTER
—
1. Introduction
Disclaimer
The data, examples and diagrams in this manual
are included solely for the concept or product
description and are not a statement of guaranteed
properties. All persons responsible for applying the
equipment described in this manual must ensure
that each intended application is suitable and
acceptable, and that all applicable safety or other
operational requirements are met.
In particular, all risks in applications where a
system failure and/or product failure would create
a risk of harm to property or persons (including but
not limited to personal injuries or death) shall be
the sole responsibility of the person or entity who
applies the equipment, and such parties are hereby
requested to ensure that all measures are taken to
exclude or mitigate such risks.
This document has been carefully checked for
accuracy by ABB, but discrepancies cannot be
completely discounted. If you discover something
you think is inaccurate or incorrect, please notify
ABB. With the exception of explicit contractual
commitments, in no event shall ABB be responsible
or liable for any loss or damage resulting from use
of this manual or application of the equipment.
Safety information
Failure to follow instructions and standard
safety procedures can result in death, personal
injury or substantial property damage.
Only a qualified electrician must be allowed
to perform the electrical installation tasks.
National and local electrical safety regulations
must always be followed.
Notice is used to address practices not related
to physical injury.
01
To Next Page
Loading...
