6.3.2.4 Scale value range
Use Navigation keys to mark Scale value range and press
“Select” to enable Scale value range. Three more
options will then illuminate in the display slotmenu:
• Display signal min as
• Display signal max as
• Display unit
Display signal min as - Press “Edit” to choose the
scaled minimum value that is to be shown in the Home
view. Use the Navigation keys to change value,
Press
“Save” to save the value. See
3
in Figure 56.
Display signal max as - Choose the scaled maximum
value that is to be shown in the Home view. Use the
Navigation keys to change value,
Press
“Save” to save the value. See
3
in Figure 56.
Display unit - Type in the unit which is to be displayed
in the Home view. It is possible to type a unit with up to
10 characters. Use the Navigation keys to change the
characters.
“Save” to save the Home view unit name.
See
4
in Figure 56.
6.3.3 Active faults/protections and
warnings
Path in menu:
Options
u Active faults / protections
Options
u Active warnings
Active faults/protections/warnings are also found in
the Options menu. The menus contain information about
faults and warnings that have occurred during operation,
and what protections that are active.
Active faults/protections and warnings menus are
highlighted black when a fault protection or warning has
occurred.
For navigation see Figure 57.
For more information about fault/warnings/protections,
see chapter 10 Troubleshooting.
Figure 57: Active fault/warnings/protections navigation
Faults
Protections
Options
Edit home view
Active faults / protections
Active warnings
Options
Warnings
Edit home view
Active faults / protections
Active warnings
Figure 56: Display slot
56
1SFC132081M0201
Local PSTX
Motor current
A
0.0
Motor voltage
V
0.0
Options 12:00 Menu
1
4
3
2
6
To Next Page
Loading...
