6.4.3 Event log
Path in menu:
Menu u Event log
For navigation, see Figure 65.
The Event log menu checks the event log in the
softstarter. When entering this menu the 100 latest events
in the log are listed, in chronological order with the latest
event as No. 1, the second latest as No. 2 etc.
The events are shown with “type of event” and date.
For details about all events press details.
Use navigation keys to view all entries in the event log.
The types of event logs are:
• Faults
• Protections
• Warnings
• Parameter changed
• Run
See Figure 64.
Faults
Use the Navigation keys to select a Fault and press
“Details” to read details about the Fault (Name, On time
and Event count). Then press the i-key to see information
about the Fault. Press
“Back” to return to Faults log
menu.
Protections
Use the Navigation keys to select a Protection and
press
“Details” to read details about the Protection
(Name, On time and Event count). Press the i-key to see
information about the Protection. Press
“Back” to
return to Protections log menu.
Warnings
Use the Navigation keys to select a Warning and press
“Details” to read details about the Warning (Name, On
time and Event count). Then press the i-key to see further
information about the Warning. Press
“Back” to return
to Warning log menu.
Parameter changed
Use the Navigation keys to select a parameter and press
“Details” to read details about the parameter which
has been changed (Name, On time and Event count).
Press
“Back” to return to Warning log menu.
Run
Use the Navigation keys to select a run event and press
“Details” to read details about the run event (Name,
On time and Event count). Press
“Back” to return to
Warning log menu.
Figure 65: Event log navigation.
Event logs
Faults
Protections
Warnings
Parameter changed
Run
MENU
Parameters
Assistants
Motor jog
Event log
Backup handling
System info
Settings
64
1SFC132081M0201
Figure 64: Event log.
Local PSTX
Event logs
Faults
Protections
Warnings
Parameter changed
Run
Done 12:00 Select
6
To Next Page
Loading...
