ABB Q952 - ACS880-17 LC;37 LC Drives with Two Main Breakers (Option +F255)

T
1
3) 4)
[a]
Mis-
sion
time
[a]
CCFHFTCat.
DC
2)
[%]
PFD
avg
PFH
1)
[1/h]
PLSCSIL /
SIL-
CL
Circuit
breaker
ACS880-07/17/37
type
20/1206502>902.1E-37.3E-7d32E3S1250-17/37-1210A-3
--17/37-1430A-3
E3S3200-17/37-1700A-3
or-17/37-2060A-3
E2.2S-
A1200
-17/37-2530A-3
-17/37-1530A-5
-
-17/37-1980A-5
E4.2V-
A4000
-17/37-2270A-5
-17/37-1450A-7
with char-
ging contact-
or
-17/37-1680A-7
-17/37-1950A-7
-17/37-2230A-7
-17/37-2770A-7
-17/37-3310A-7
-17LC/37LC-
0390A-7
to
-17LC/37LC-
3580A-7
3AXD10000097591 H
1)
PFH values are according to EN ISO 13849.
2)
In low demand mode, DC of electromechanical devices is considered as 0%, and therefore no overall DC value is claimed
in low demand mode.
3)
See the recommendation of use CNB/M/11.050 published by the European co-ordination of notified bodies for lower T
1
requirement.
4)
T
1
= 20a is used with high demand mode of operation. T
1
= 1a is used with low demand mode of operation.
5)
12-pulse variant (option +A004)
Note: If T
1
> 1a is needed in low demand mode of operation, SIL 1 / PL c levels are used
and PFD is calculated separately.
ACS880-17LC/37LC drives with two main breakers (option +F255)
T
1
4) 5)
[a]
Mis-
sion
time
[a]
CCFHFTCat.
DC
3)
[%]
PFD
avg
PFH
2)
[1/h]
PFH
1)
[1/h]
PLSCSIL /
SIL-
CL
Circuit
breaker
ACS880-
17LC/37LC
type
20/1206502>903.4E-31.2E-61.0E-7c322× E4.2S-A
3200
-4050A-7
to
or
-6260A-7
2× E4.2V-A
4000 with
charging
contactor
3AXD10000097591 H
1)
PFH values according to IEC 62061.
2)
PFH values according to EN ISO 13849.
3)
In low demand mode, DC of electromechanical devices is considered as 0%, and therefore no overall DC value is claimed
in low demand mode.
4)
See the recommendation of use CNB/M/11.050 published by the European co-ordination of notified bodies for lower T
1
requirement.
5)
T
1
= 20a is used with high demand mode of operation. T
1
= 1a is used with low demand mode of operation.
Technical data 51