A051440 2
Fig. 16.1.-6 HMI test page
Base Unit not configured
REF 542plus is without configuration when the following message appears:
A051441 2
Fig. 16.1.-7 REF 542plus without configuration
Solution:
Download the configuration into the unit by using the serial cable and the Operating
Tool.
Configuration not loaded
The following message appears when the downloaded configuration has not been
saved inside the unit due to an internal error.
64
REF 542plusREF 542plus
Multifunction Protection and Switchgear Control Unit
Operator's manual
1MRS755869
To Next Page
Loading...
