I.L. 40-386.3
4-20 (10/94)
TABLE 4-2. METERING DISPLAY
Information Displayed As
Phase A current (magnitude & angle) IA: magnitude (Amps) and angle (°)
Phase A voltage (magnitude & angle) VAG: magnitude (Amps) and angle (°)
Phase B current (magnitude & angle) IB: magnitude (Amps) and angle (°)
Phase B voltage (magnitude & angle) VBG: magnitude (Amps) and angle (°)
Phase C current (magnitude & angle) IC: magnitude (Amps) and angle (°)
Phase C voltage (magnitude & angle) VCG: magnitude (Amps) and angle (°)
Time and date TimeDate
Local, Remote or both setting control Settings
Carrier receive-1 (Yes or No) (RX1) Rx Ch1
Carrier receive-2 (Yes or N0) (RX2) Rx Ch2
Date of last setting change Last Set
LOP condition if present LOP
LOI condition if present LOI
Out-of-step block if present OS Block
To Next Page
Loading...
