• Load profile record
• Acc. energy of circuit breaker condition monitoring, three-phase power
and energy measurement and single-phase power and energy
measurement
• Rem. life of circuit breaker condition monitoring
• Travel times of circuit breaker condition monitoring
• Spr. charge time of circuit breaker condition monitoring
• Temperature of three-phase thermal protection for feeders, cables and
distribution transformers, and thermal overload protection for motors
• Reset of autoreclosing and cable fault detection
• Operation time of runtime counter for machines and devices
• Counters for autoreclosing and motor startup supervision
• Master trip
A070860 V4 EN
Figure 79: Clear view
2.
Select the item to be cleared with or .
3.
Press , change the value with or and press again.
The item is now cleared.
4. Repeat the steps to clear other items.
Use the
button as a shortcut for clearing. The first three-second
press clears the indications. The second three-second press clears the
programmable LEDs.
1MRS758754 B Section 6
Operating procedures
REC615 and RER615 99
Operation Manual
To Next Page
Loading...
