A071166 V3 EN
Figure 83: Selecting a setting group
3.
To browse the settings, scroll the list with and and to select a setting press
.
4.
To browse different function blocks, scroll the list with and and to select
a function block press
. To move back to the list, press .
The function block list is shown in the content area of the display. On the left in
the header, you see the current setting group, and on the right the menu path.
5.
To browse the parameters, scroll the list with
and and to select a
parameter, press .
The setting group values are indicated with #.
A070899 V3 EN
Figure 84: Setting group parameter
6.
To select a setting group value, press and to edit the value press .
Section 6 1MRS758754 B
Operating procedures
102 REC615 and RER615
Operation Manual
To Next Page
Loading...
