Ensure that the correct settings are imported to the correct protection
relay. Wrong settings may cause the protection relay to malfunction.
1. Click Import/Export on the menu bar.
2. Click Browse and choose the file to be imported.
3. Click Import Settings.
Wait until the file transfer is complete.
GUID-69EFD0B9-C544-48D5-9645-F5B04C229BD9 V2 EN
Figure 61: Importing settings
4. Click OK to commit the imported settings to the protection relay.
Wait until the import is complete.
• Click Cancel to cancel the importing. Both the WHMI and the protection
relay revert to the settings in use prior to the import.
1MRS758754 B Section 4
Using the HMI
REC615 and RER615 79
Operation Manual
To Next Page
Loading...
