Section 3 1MRS240173-IB B
0x registers
18 REF615R
DPU2000R Modbus Point List Mitigation Manual
3.1.2 Physical output block (Single-bit data)
REF615R inherits the same layout of physical I/O channels from DPU2000R. Besides
DPU2000R's normal speed I/O card, REF615R offers high speed I/O cards. As a result,
REF615R extends Modbus points for physical output block (single-bit data) to the coil
address of 288.
Table 2: Mitigations of Modbus registers mapping for the physical output points in single-bit block
TRIPA, TRIPB, TRIPC are mapped to different coil addresses in
REF615R with those in DPU2000R.
DPU2000R
register
addr.
DPU 2000R description
REF615R
register
addr.
IEC 61850 path
Comments on REF615R Modbus points
mapping
257 Reserved Status
257 Normal speed BIO card
273 High speed BIO card
258 Reserved Status
258 Normal speed BIO card
274 High speed BIO card
259 Reserved Status
259 Normal speed BIO card
275 High speed BIO card
260 Reserved Status
260 Normal speed BIO card
276 High speed BIO card
261 Reserved Status
261 Normal speed BIO card
277 High speed BIO card
262 Reserved Status
262 Normal speed BIO card
278 High speed BIO card
263 OUT 8 (reserved) Status
263 Normal speed BIO card
279 High speed BIO card
264 OUT 7 (reserved) Status
264 Normal speed BIO card
280 High speed BIO card
265 OUT 6 Status
265 LD0.XUGGIO100.SPCSO6.stVal Normal speed BIO card
281 LD0.XBUGGIO110.SPCSO6.stVal High speed BIO card
266 OUT 5 Status
266 LD0.XUGGIO100.SPCSO5.stVal Normal speed BIO card
282 LD0.XBUGGIO110.SPCSO5.stVal High speed BIO card
267 OUT 4 Status
267 LD0.XUGGIO100.SPCSO4.stVal Normal speed BIO card
283 LD0.XBUGGIO110.SPCSO4.stVal High speed BIO card
268 OUT 3 Status
268 LD0.XUGGIO100.SPCSO3.stVal Normal speed BIO card
284 LD0.XBUGGIO100.SPCSO3.stVal High speed BIO card
269 OUT 2 Status
269 LD0.XUGGIO110.SPCSO2.stVal Normal speed BIO card
285 LD0.XBUGGIO100.SPCSO2.stVal High speed BIO card
To Next Page
Loading...
