1.4.1 Symbols
The caution icon indicates important information or warning related to
the concept discussed in the text. It might indicate the presence of
a hazard which could result in corruption of software or damage to
equipment or property.
The information icon alerts the reader of important facts and conditions.
The tip icon indicates advice on, for example, how to design your project
or how to use a certain function.
Although warning hazards are related to personal injury, it is necessary to
understand that under certain operational conditions, operation of damaged
equipment may result in degraded process performance leading to personal injury
or death. Therefore, comply fully with all warning and caution notices.
1.4.2 Document conventions
A particular convention may not be used in this manual.
• Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
• Menu paths are presented in bold.
Select Main menu> Settings.
• Parameter names are shown in italics.
The function can be enabled and disabled with the
Operation
setting
• Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
• Input/output messages and monitored data names are shown in Courier font.
When the function starts, the START output is set to TRUE.
• Values of quantities are expressed with a number and an SI unit. The
corresponding imperial units may be given in parentheses.
• This document assumes that the parameter setting visibility is "Advanced".
Introduction
2NGA001859 A
12 REX615
IEC 60870-5-104 Communication Protocol Manual
To Next Page
Loading...
