Dry cold test According to IEC 60068-2-1
Damp heat test, cyclic (humidity >93%) According to IEC 60068-2-30
Atmospheric pressure 86...106 kPa
Table 5.2.3.-12 Electromagnetic compatibility tests
EMC immunity test level meets the requirements listed below:
1 MHz burst disturbance test, class III According to IEC 60255-22-1
*
Common mode 2.5 kV
*
Differential mode 1.0 kV
Electrostatic discharge test, class IV According to IEC 61000-4-2, IEC 60255-22-2
and ANSI C37.90.3-2001
*
For contact discharge 8 kV
*
For air discharge 15 kV
Radio frequency interference tests:
*
Conducted, common mode According to IEC 61000-4-6 and IEC 60255-
22-6 (2000)
10 V (rms), f = 150 kHz...80 MHz
*
Radiated, amplitude-modulated According to IEC 61000-4-3 and IEC 60255-
22-3 (2000)
10 V/m (rms), f = 80...1000 MHz
*
Radiated, pulse-modulated According to the ENV 50204 and IEC 60255-
22-3 (2000)
10 V/m, f = 900 MHz
Fast transient disturbance tests According to IEC 60255-22-4 and IEC 61000-
4-4
*
Trip outputs, energizing inputs, power
supply
4kV
*
I/O ports 2 kV
Surge immunity test According to IEC 61000-4-5
*
Trip outputs, energizing inputs, power
supply
4 kV, line-to-ground
2 kV, line-to-line
*
I/O ports 2 kV, line-to-ground
1 kV, line-to-line
Power frequency (50 Hz) magnetic field
IEC 61000-4-8
300 A/m continuous
Voltage dips and short interruptions According to IEC 61000-4-11
30%/10 ms
60%/100 ms
60%/1000 ms
>95%/5000 ms
Electromagnetic emission tests According to the EN 55011
*
Conducted, RF-emission (Mains terminal) EN 55011, class A, IEC 60255-25
*
Radiated RF-emission EN 55011, class A, IEC 60255-25
CE approval Complies with the EMC directive 89/336/EEC
and the LV directive 73/23/EEC
122
REM 610REM 610
Motor Protection Relay
Technical Reference Manual - ANSI Version
1MRS755537
To Next Page
Loading...
