time in messages with the type identification 2 is calculated as a time difference
between the occurred event and the event specified in the column Relative time. The
measurand multiplied by the normalize factor is proportional to the rated value.
Therefore, the maximum value of each measurand is the normalize factor multiplied
by the rated value.
Table 5.1.13.-1 Information mapping of configuration set 1 and 2
Event reason
Event code
Configuration set 1
Configuration set 2
Function type
Information number
GI
Relative time
Type identification
Emergency start Activated/Reset 0E5/
0E6
X X 11 31 X - 1
Disturbance recorder Triggered/Cleared 0E31/
0E32
X X 178 100 - - 1
HMI Setting password Opened/Closed 0E33/
0E34
X X 178 101 - - 1
HMI Communication password Opened/Closed 0E35/
0E36
X X 178 102 - - 1
Motor start up Begins/Ends 1E1/
1E2
X X 178 84 X 1E1 2
49 Pickup/Reset 1E3/
1E4
X X 184 84 X 1E3 2
49 Alarm/Reset 1E5/
1E6
X X 184 11 X 1E3 2
49 Trip/Reset 1E7/
1E8
X X 184 90 - 1E3 2
49 Restart
Disable/Reset 1E9/
1E10
X X 184 30 X 1E3 2
66 Restart
Disable/Reset 1E11/
1E12
X X 178 30 X - 1
Restart Disable/Reset 1E13/
1E14
X X 11 30 X - 1
(48/14 PICKUP)
2
x (48/14 TDLY)/(48/14) Pickup/Reset 1E15/
1E16
X X 160 84 X 1E15 2
(48/14 PICKUP)
2
x (48/14 TDLY)/(48/14) Trip/Reset 1E17/
1E18
X X 160
a)
178
90 - 1E15 2
50P Pickup/Reset 1E19/
1E20
X X 162 94 X 1E19 2
50P Trip/Reset 1E21/
1E22
X X 160 91 - 1E19 2
37 Pickup/Reset 1E23/
1E24
X X 20 84 X 1E23 2
37 Trip/Reset 1E25/
1E26
X X 20 90 - 1E23 2
72
REM 610REM 610
Motor Protection Relay
Technical Reference Manual - ANSI Version
1MRS755537
To Next Page
Loading...
