ABB RET620 - LD0.SSCBR2 Reset Signals of CB Condition Monitoring; Metering and Measurand Functions; LD0.PEMMXU1 Reset Accumulated Energy Values; Protection Functions

2.4.3.2 LD0.SSCBR2 Reset signals of CB condition monitoring
Table 126: LD0.SSCBR2 Reset signals of CB condition monitoring
IEC 61850 name SA name Description Type
LD0.SSCBR2
.RsAccAPwr.Oper.ctlVal RST_IPOW Reset accum. energy On
.RsCBWear.Oper.ctlVal RST_CB_WEAR Reset CB life and op. counter On
.RsSprChaTm.Oper.ctlVal RST_SPR_T Reset spring charge alarm On
.RsTrvTm.Oper.ctlVal RST_TRV_T Reset travel time alarm On
2.4.4 Metering and measurand functions
2.4.4.1 LD0.PEMMXU1 Reset accumulated energy values
Table 127: LD0.PEMMXU1 Reset accumulated energy values
IEC 61850 name SA name Description Type
LD0.PEMMXU1
.SupDmdRs.Oper.ctlVal RSTACM Reset accum. energy On
2.4.5 Protection functions
2.4.5.1 LD0.LSHDPFRQ1 Loadshedding controls (1)
Table 128: LD0.LSHDPFRQ1 Loadshedding controls (1)
IEC 61850 name
SA name Description Type
LD0.LSHDPTRC1
.ManRest.Oper.ctlVal MAN_RESTORE Manual restore On
.BlkRest.Oper.ctlVal BLK_REST Cancel restore On
2.4.5.2 LD0.LSHDPFRQ2 Loadshedding controls (2)
Table 129: LD0.LSHDPFRQ2 Loadshedding controls (2)
IEC 61850 name
SA name Description Type
LD0.LSHDPTRC2
.ManRest.Oper.ctlVal MAN_RESTORE Manual restore On
.BlkRest.Oper.ctlVal BLK_REST Cancel restore On
1MRS757660 A Section 2
DNP3 data mappings
RET620 55
Point List Manual