ABB ret650 - Page 266

Name of input Type Default Description Value when
activated
Value when
deactivated
IN1 BOOLEAN 0 Input 1 1 0
IN2 BOOLEAN 0 Input 2 2 0
IN3 BOOLEAN 0 Input 3 4 0
IN4 BOOLEAN 0 Input 4 8 0
IN5 BOOLEAN 0 Input 5 16 0
IN6 BOOLEAN 0 Input 6 32 0
IN7 BOOLEAN 0 Input 7 64 0
IN8 BOOLEAN 0 Input 8 128 0
IN9 BOOLEAN 0 Input 9 256 0
IN10 BOOLEAN 0 Input 10 512 0
IN11 BOOLEAN 0 Input 11 1024 0
IN12 BOOLEAN 0 Input 12 2048 0
IN13 BOOLEAN 0 Input 13 4096 0
IN14 BOOLEAN 0 Input 14 8192 0
IN15 BOOLEAN 0 Input 15 16384 0
IN16 BOOLEAN 0 Input 16 32768 0
The sum of the numbers in column “Value when activated” when all INx (where
1≤x≤16) are active that is=1; is 65535. 65535 is the highest boolean value that can
be converted to an integer by the IB16 function block.
12.11 Integer to Boolean 16 conversion with logic node
representation ITBGAPC
SEMOD158419-1 v3
12.11.1 Identification
SEMOD167944-2 v4
Function description
IEC 61850
identification
ANSI/IEEE C37.2
device number
Integer to boolean 16 conversion with
logic node representation
ITBGAPC -
-
12.11.2 Application
SEMOD158512-5 v7
Integer to boolean 16 conversion with logic node representation function
(ITBGAPC) is used to transform an integer into a set of 16 boolean signals.
ITBGAPC function can receive an integer from a station computer – for example,
over IEC 61850–8–1. This function is very useful when the user wants to generate
Section 12 1MRK 504 169-UEN A
Logic
260 Transformer protection RET650 2.2 IEC
Application manual