2.2 Configuration and engineering tool for RIO600
PCM600 with the RIO600 connectivity package is used for configuring RIO600.
• Configuring RIO600 in online and offline mode
• Setting the operating parameters for the modules using PST
• Performing the I/O mapping across the modules using SMT
• Reading and writing the configuration and the parameter file to RIO600
CCT600 or IET600 are used to establish the GOOSE communication between the
IEDs configured in PCM600.
2.2.1 PCM600 and RIO600 connectivity package version
• Protection and Control IED Manager PCM600 Ver. 2.3 or later
• RIO600 Connectivity Package Ver. 1.0 or later
2.3 Hardware and software requirements
Table 1: Requirements
Description
Requirements
Hardware Pentium III, 800 MHz or higher
128 RAM or higher
40 MB free disk space
Software Operating SystemWindows 98 / XP / VISTA / Windows 7
Microsoft .NET Framework 2.0
PCM600 Ver.2.3 or later
IET600
1MRS757489 A Section 2
RIO600 overview
RIO600 9
Configuration Manual
To Next Page
Loading...
