ABB RPBA-01 - Page 24

Quick start-up guide
24
Siemens Simatic S7 requires the use of special functions SFC15
and SFC14.
The start/stop commands and reference are according to the
PROFIdrive profile. (See the PROFIBUS state machine on page
77.) The reference value ±16384 (4000h) corresponds to the
nominal speed of the motor (parameter 99.08) in forward and
reverse directions.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com