Quick start-up guide
25
ABB DRIVES profile (Vendor-specific) with PPO Type 2 (DP-V0)
Drive parameter Setting
ACS800 ACS550
10.01 EXT1 STRT/STP/DIR COMM.CW COMM
10.02 EXT2 STRT/STP/DIR COMM.CW COMM
11.02 EXT1/EXT2 SELECT COMM.CW COMM
11.03 EXT REF1 SELECT COMM. REF COMM
16.01 RUN ENABLE COMM.CW COMM
16.04 FAULT RESET SEL COMM.CW COMM
98.02 COMM. MODULE LINK FIELDBUS –
98.02 COMM PROT SEL – EXT FBA
98.07 COMM PROFILE ABB DRIVES –
51.01 MODULE TYPE PROFIBUS DP*
51.02 NODE ADDRESS 4
51.03 BAUDRATE 1500*
51.04 PPO-TYPE PPO2*
51.05 PZD3 OUT 1202 (CONST SPEED 1)**
51.06 PZD3 IN 104 (CURRENT)**
51.07 PZD4 OUT 2501 (CRIT SPEED SEL)**
51.08 PZD4 IN 105 (TORQUE)**
51.09 PZD5 OUT 2502 (CRIT SPEED 1 LO)**
51.10 PZD5 IN 106 (POWER)**
51.11 PZD6 OUT 2503 (CRIT SPEED 1 HI)**
51.12 PZD6 IN 107 (DC BUS VOLTAGE)**
• • • • • •
51.21 DP MODE 0
51.27 FBA PAR REFRESH REFRESH
*Read-only or automatically detected; **Example
To Next Page
Loading...
