ABB Sace TMAX XT XT4 ELECTRONIC - Page 14

14
INSTRUCTION HANDBOOK
26
By means of the flat screwdriver and by means
of the pliers dismount the pin and remove the
pin and the 2 springs mounted on the pin.
24
Manually remove the tripping shaft from the
operating mechanism pulling it as indicated by
the arrow.
25
By means of the flat screwdriver remove the
metal plate mounted on the tripping shaft.
Disassembled parts
 
 


flame retardants)
 
 
(
Thermoplastics containing brominated flame
retardants)
 
 