ABB Sace TMAX XT XT4 ELECTRONIC - 6.4 PHASE 4 - TRIP UNIT

9
Disassembly instruction tmaX Xt Xt4 electronic
6.4 PHASE 4 – TRIP UNIT
9
By means of the cross screwdriver unscrew the
2 screws fixing the trip unit frontal to the trip
unit main structure.
11
By means of the cutter start removing the label
located on the trip unit frontal and manually
complete the operation.
10
Manually disasseble the transparent protection
from the trip unit frontal.
12
By means of the torx key unscrew the 3 screws
fixing the trip unit to the breaking part.
Actions to be performed
Tools
Cross screwdriver
Torx key
Cutter
No. 15