Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
8 Disassembly and assembly / 8.7 Fitting the cartridge group
© Copyright 2020 . All rights reserved. HZTL2481_EN Rev.D March 2020
u Fit O-rings (77005 and 77006) to wall insert (77000).
u Fit lifting gear and swivel lifting eyes (90230).
u Align wall insert (77000) with threaded holes in compressor casing in-
ternal part (76000) using spigots on swivel lifting eyes and lower it.
u Loop the lifting gear around the diffuser (79000), align it with the
holes and lower it into position.
u Screw in the screw (76002) as far as it will go and then loosen it by a
¼ revolution. The screw must be loose and the diffuser must be mov-
able.
Page 102 / 134
To Next Page
Loading...
