Operation Manual / TPS44-F.. - TPS61-F..
9 Taking out of operation / 9.1 Shutting down the turbocharger
© Copyright 2020 . All rights reserved. HZTL2412_EN Rev.G March 2020
Fitting the cover plate
u Close the opening in the turbine casing using the cover plate (A).
u Fasten the cover plate on the turbine casing (51000) using the fasten-
ing strips (51002), Verbus Ripp® Verbusripp washers (51003) and nuts
(51007) and screw it down securely on the support.
NOTICE
Thoroughly clean the fastening strips (51002) before fitting them. Apply
high-temperature grease to the stud threads (51006).
Page 102 / 113
To Next Page
Loading...
Need help?
General
