To Next PageTo Next PageWhat causes fouling of the compressor in my ABB charger?
Fouling of the compressor in your ABB charger, due to the feeding in of ventilation gases, may result from: * Heavy fouling of the compressor components: Clean compressor. * Material of compressor wheel corroded: Check the fuel and its corrosive components, and change fuel if necessary.
Why is my ABB TPS48-F32 Industrial Equipment vibrating?
Vibrations in your ABB Industrial Equipment can occur due to several reasons. It might be caused by rotor unbalance, in which case you should contact an ABB Turbocharging Service Station. Vibrations can also arise from a damaged turbine or compressor, or a damaged bearing.
Why is the exhaust gas temperature too high in my ABB charger?
If the exhaust gas temperature is too high in your ABB charger, it could be due to several reasons: * A malfunctioning injection system: Repair it or contact the manufacturer. * Air starvation (e.g., a filter silencer clogged with dirt): Clean the filter silencer. * High exhaust counterpressure: Clean or repair the boiler or exhaust silencer. * A contaminated cooler: Clean the cooler. * Low cooling water volume: Top up the water. * High cooling water entry temperature: Inspect or clean the cooling system. * Inadequate ventilation: Improve the ventilation.
How to fix sluggish start-up of ABB TPS48-F32?
A sluggish start-up of your ABB Industrial Equipment can occur if the turbocharger is contaminated. In this case, clean the turbocharger. Another possible cause is a damaged bearing. If the bearing is damaged, contact an ABB Turbocharging Service Station.
What to do if ABB TPS48-F32 Industrial Equipment is vibrating?
If your ABB Industrial Equipment is vibrating, it may be due to rotor unbalance. In this situation, contact an ABB Turbocharging Service Station.
What to do if rotating parts of ABB TPS48-F32 Industrial Equipment are rubbing?
Rubbing of rotating parts in ABB Industrial Equipment can be normal behavior and not a malfunction. If there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
How to fix a sluggish start-up in ABB Industrial Equipment?
If your ABB Industrial Equipment has a sluggish start-up, it might be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
What to do if rotating parts are rubbing in ABB TPS48-F32?
If you suspect rubbing of rotating parts within your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
What to do if ABB TPS48-F32 has vibration?
If your ABB Industrial Equipment is vibrating, it could be due to rotor unbalance, in which case you should contact an ABB Turbocharging Service Station. Other potential causes include a damaged turbine or compressor, or a damaged bearing.
Why is my ABB Industrial Equipment start-up sluggish?
A sluggish start-up of your ABB Industrial Equipment can be attributed to several factors. The turbocharger may be contaminated and needs cleaning. Alternatively, there could be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other possible causes include a rubbing rotor or a foreign object present in the turbocharger.
General| Brand | ABB |
|---|---|
| Model | TPS48-F32 |
| Category | Industrial Equipment |
| Language | English |
Introduces safety aspects, residual risks, and operator responsibilities.
Outlines general safety for operation, work area, and specific tasks.
Details risks like mechanical hazards, noise, and hot surfaces.
Details requirements for lubrication, oil filtration, viscosity, and pressure.
Covers checks before and after commissioning and during operation.
Explains routine checks, visual inspections, and functional checks.
Details procedures for shutting down oil-cooled and water-cooled turbochargers.
Explains wet cleaning methods for the compressor stage.
Covers methods for cleaning turbine components to maintain efficiency.
Lists possible causes and solutions for sluggish start-up and vibrations.
Addresses causes of surging and potential component damage.
Covers issues like low oil pressure, speed changes, and temperature problems.
Step-by-step guide for disconnecting and removing the turbocharger.
Instructions for mounting the turbocharger, including torque values.
Detailed procedures for component removal and reassembly.
