To Next PageTo Next PageWhy is my ABB Battery Charger vibrating?
If your ABB Battery Charger is experiencing vibration, it could be due to rotor unbalance. In this case, contact an ABB Turbocharging Service Station. It might also indicate a damaged turbine, compressor, or bearing.
What to do if rotating parts are rubbing in ABB Battery Charger?
If the rotating parts of your ABB Battery Charger are rubbing, have a dimension check carried out by an ABB Turbocharging Service Station.
How to fix low charge air pressure in ABB TPS57-F32?
If the charge air pressure is too low, it could be due to several reasons. The air receiver or gas piping between the engine and the turbine might be leaking, so make repairs to the air receiver, or correct a poorly adjusted injection system. A contaminated filter silencer can also cause excessive pressure loss, so clean it. Additionally, check the manometer; if it's displaying the wrong reading, replace it, or if the line to the manometer is leaking, repair the leak. If the exhaust counterpressure is too high, clean or repair the boiler or exhaust silencer.
What to do if exhaust gas temperature is too high in ABB TPS57-F32?
If the exhaust gas temperature is too high, it could be due to a malfunctioning injection system, so repair it. Air starvation, possibly from a filter silencer clogged with dirt, can also cause this issue, so clean it. High exhaust counterpressure can be another cause, so clean or repair the boiler or exhaust silencer. A contaminated cooler can also contribute, so ensure it is clean. Check if the cooling water volume is too low and top up the water if needed. Inspect and clean the cooling system if the entry temperature of cooling water is too high. Finally, improve the ventilation if it's inadequate.
How to stop turbocharger surging in ABB Industrial Equipment?
Turbocharger surging can occur if the guard in front of the turbocharger is contaminated or damaged, so clean or replace it. Another cause could be a contaminated filter silencer or diffuser, so clean it. Also, a contaminated cooler can lead to surging, so ensure that it is clean. Surging may also be caused by a blocked charge air duct.
General| Brand | ABB |
|---|---|
| Model | TPS57-F32 |
| Category | Industrial Equipment |
| Language | English |
Explains the manual's purpose and scope for the turbocharger operation.
Describes the turbocharger's main components and their arrangement.
Details the turbocharger's intended application, limitations, and safety.
Provides guidelines for storing new and spare turbocharger units and parts.
Covers organizational measures, safety consciousness, and personnel competence.
Explains symbols, notes, and defines key terms used throughout the manual.
Explains the various data fields and their meaning on the turbocharger's rating plate.
Provides contact details for ABB Turbo Systems service stations and website.
Introduces safety aspects, potential residual risks, and operator responsibilities.
Illustrates and defines required safety signs and necessary personal protective equipment.
Outlines essential safety procedures for operation, maintenance, and work area.
Details mechanical, noise, hot surface, electrical, and environmental hazards.
Covers oil supply requirements, filtration, viscosity, temperature, and pressure.
Details inspection procedures required before, during, and after commissioning.
Discusses noise levels and requirements for acoustic insulation.
Covers routine service, intervals, and inspection recommendations.
Lists recommended replacement intervals for key turbocharger components.
Provides correct procedures for stopping the engine for different cooling types.
Introduces general maintenance tasks like visual checks and cleaning.
Details methods for wet cleaning the compressor stage without disassembly.
Explains wet cleaning procedures for turbine components to remove deposits.
Lists possible causes and eliminations for sluggish start-up and vibrations.
Covers issues like low oil pressure, speed changes, and temperature anomalies.
Troubleshoots issues with the speed sensor, signal accuracy, and measurement system.
Shows methods for suspending and transporting turbochargers.
Details the step-by-step procedure for safely removing the turbocharger from the engine.
Outlines the procedure for correctly installing the turbocharger onto the engine support.
Preconditions and general notes for disassembly and assembly work.
Provides detailed steps for disassembling and assembling the turbocharger.
Lists specified tightening torques for various screw connections on the turbocharger.
Procedure for safely shutting down the turbocharger for emergency repairs.
Covers mothballing procedures based on lubricating oil condition for short-term storage.
Specifies data needed for ordering spare parts and guidelines for their storage.
Illustrates turbocharger components with their corresponding part numbers for identification.
