Need help?Do you have a question about the ABB TPU2000 and is the answer not in the manual?
General| Manufacturer | ABB |
|---|---|
| Power Supply | 24 VDC |
| Category | Panel PC |
| Display | TFT LCD |
| Protection | IP54 (Front) |
| Type | Industrial Panel PC |
| Touch Technology | Resistive touch |
| Processor | Intel |
| Operating System | Windows |
| Communication Ports | Ethernet, USB |
Details available communication option cards and their part numbers.
Describes parameter setup for the COM 0 port, including node address, baud rate, and frame settings.
Details configuration options for COM Ports 1 & 2 on TPU2000R, accessible via WinECP or front panel.
Explains Modbus parameterization for Port 3 and AUX COM, including baud rate and frame selection.
Explains master/slave operation, ASCII, and RTU emulation types.
Discusses Modbus Plus protocol, its proprietary interface, and benefits like increased speed and simultaneous conversations.
Details the mapping of Modbus and Modbus Plus registers for various data types and functions.
Details the method for handling SCADA host restrictions by scaling and re-mapping data.
Lists common issues like improper device termination, cable usage, addressing, routing, and grounding.
To Next Page
