ABB TPU2000 - Table 5-71. Alternate 2 Settings for 3 Winding Block

TPU2000/2000R Modbus/Modbus Plus Automation Guide
205
Register
Address
Item Description
0<=Range<=10 * 20 : Time Delay
61331 50G-2 Curve Select Byte (TYPE II) Unsigned Integer 16 bits
0<=Range<=12 (See Text Above)
61332 51G-2 Pickup Amps Unsigned 16 Bits
0.5<=Range<= 20 *10
61333 51G-2 Time Dial/Delay Setting Unsigned 16 Bits
Time Dial * 10
Delay * 100
61334 150G-2 Curve Select (TYPE II) Unsigned Integer 16 bits
See Table Above
61335 150G-2 Pickup Amps Unsigned 16 Bits
0.5<=Range<= 20 *10
61336 150G-2 Time Delay Unsigned 16 Bits
0<=Range<=9.99 * 100
61337 Disturb 2 Pickup X Unsigned Integer 16 Bits
0.5<= Range<=5 *10
61338 Level Detector-1 Pickup X Unsigned Integer 16 Bits
0.5<= Range<=20 *10 , 201 = Disable
61339 Level Detector-1 Pickup X Unsigned Integer 16 Bits
0.5<= Range<=20 *10 , 201 = Disable
61340 Unit Configuration Byte Unsigned Integer 16 Bits (rightmost bit)
Bit 0: Neutral Tap Range Wdg1 (lsb)
(0 = 1-12 A, 1 = 0.2-2.4A)
Bit 1: Neutral Tap Range Wdg1
(0 = 1-12 A, 1 = 0.2-2.4A)
Bit 2: Neutral Tap Range Wdg1
(0 = 1-12 A, 1 = 0.2-2.4A)
Bit 3: Neutral Tap Range Wdg1
(0 = 1-12 A, 1 = 0.2-2.4A)
Bit 4: User Definable Curves
Bit 5: Reserved
Bit 6: Neutral Tap Range Wdg 3
(0 = 1-12 A, 1 = 0.2-2.4A)
Bit 7: Phase Tap Range Wdg3
(0 = 1-12 A, 1 = 0.2-2.4A)
Bit 8: MOCT’s on Wdg1
(1= None 0= MOCT Present)
Bit 9: MOCT’s on Wdg1
(1= None 0= MOCT Present)
Bit 10: Reserved
Bit 11: Reserved
Bit 12: Reserved
Bit 13: Reserved
Bit 14: Reserved
Bit 15: Reserved (msb) (leftmost bit)
Table 5-71. Alternate 2 Settings for 3 Winding Block
Register
Address
Item Description
63456
S
S
P
P
A
A
R
R
E
E
_
_
1
1
63457 Execute Register
0 = No Action
1 = Update Registers
2 = Refresh Registers
Unsigned 16 Bits
63458 Access Password ASCII – 2 Characters Leftmost Digits