ABB UMC100-FBP User Manual

Technical Description
Universal Motor Controller
UMC100-FBP

ABB UMC100-FBP Specifications

General

Brand	ABB
Model	UMC100-FBP
Category	Controller
Language	English

Summary

Commissioning

Commissioning Steps

Outlines the necessary steps for commissioning the UMC100-FBP, including wiring and power-up.

Setting the fieldbus node address

Procedure for setting the unique address for fieldbus network integration.

Start configuring the UMC100 via LCD panel, laptop or control system

Details on initial parameter adjustment methods via different interfaces.

Configuring the Motor Protection Functions

General Information

EOL and Current based Protection Functions

Details on configuring overload, overcurrent, undercurrent, and imbalance protection.

Earth Fault Protection

Explains earth fault detection methods, either internal or via external CT.

Configuring the Motor Management Functions

Limit the Number of Starts

Emergency Start

Checkback Monitoring

Configuring the Fieldbus Communication

Setting the Bus Address

How to set the unique address for UMC integration into fieldbus networks.

Address Check when using UMC in Motor Control Centres

Defining the Bus Fault Reaction

The LCD Control Panel UMC100-PAN

Monitoring Status Information

The Menu Tree

Starting and Stopping the Motor

Operation of motor start/stop functions directly from the LCD panel.

Error Handling, Maintenance and Service

Error Handling of the UMC

Describes how the UMC detects, latches, and manages fault conditions.

Fault Messages

Lists diagnosis messages, root causes, and suggested actions for troubleshooting.

Resetting Parameters to Factory Defaults