ABB UMC100-FBP - Page 145

- 145 - UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
FieldBusPlug / Issue: 03.2012
Thermistor Motor Protection (PTC - binary) Type A
Short circuit resistance
Current at short circuit conditions
< 21 
1.5 mA (typ.)
Response time 800 ms
Max. cold resistance of PTC sensor chain < 1.5 k
Line length
2.5 mm
2
: 2 x 250 m
1.5 mm
2
: 2 x 150 m
0.5 mm
2
: 2 x 50 m
Isolation No
Fieldbus Connection
Mounting Plug connection, fastening with supplied screw
Tightening torque of the fixing screw 0.8 Nm + rotation 90 degree
Suitable ABB FieldBusPlug types for PROFIBUS: PDP22-FBP or PDQ22
Modbus: MRP21
DeviceNet: DNR21
CANopen: COP21
Environmental and mechanical data
Mounting On DIN rail (EN 50022-35) or with 4 screws M4
Mounting position Any
Dimensions (W x H x D) 70 x 105 x 110 mm
(incl. FieldBusPlug and Control Panel)
Net weight 0.28 kg (current transformer + controller unit)
Wire size and tightening torque
Tightening torque for screw mounting 0.8 Nm
Degree of protection UMC: IP20
Temperature range Storage -25 ... +70 °C
Operation 0 ... +60 °C
Marks, Approvals CE, cUL, Further in preparation. Ask your local
sales representative for other approvals.
ø 3,5 mm / 0.138 in
0.5 Nm
4.5 in.lb
1x 0.2 ... 2.5mm²
1x 28 ... 12 AWG
7mm
0.28 in
7mm
0.28 in
1x 0.2-2.5mm²
1x 28 ... 12 AWG