ABB UMC100-FBP - Page 67

- 67 - UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
FieldBusPlug / Issue: 03.2012
The unchanged signal from the DI is always available for monitoring purposes (Input 1/2/3 status).
Full
*)
*)
*)
Test Postion
Motor Stop Delayed
Input 0 Status
Input 1 Status
Input 2 Status
DI0
DI1
DI2
On Delay
Ton
…
≥1
1
≥1≥1
≥1≥1
…
…
On Delay
Ton
≥1
1
≥1
1
…
On Delay
Ton
≥1
1
≥1
1
External Fault 0
External Fault 1
External Fault 2
*) If a digital input is already used for the starter function (e.g. for torque inputs in the actuator modes or
for contactor checkback) they are not available anymore as multifunction inputs.